200 kW Habanero Module

In place of the traditional coil in tank style calorifier, together with RM Cylinders, Waterware have developed an external heat exchanger module which manifolds directly into the accumulators pre-arranged ports. This allows a significantly higher kW transfer than would normally be possible if using internal heat exchange coils while also retaining the full 500L or 1000L storage capacity. The result is large volume hot water production for less cost and a smaller foot print. The 500L and 1000L share the same convenient tapping size and positions which will accept both the 100kW or 200kW Habanero modules.

Specification:
Heat exchanger brand/type: GEA / AISI304 brased plate
Maximum transfer: 200 kW
Primary required flow: 14.7m3/hr
Primary pressure drop: 35 kPa
Secondary pump type: 32mm Bronze re circulating
Voltage: 230V
Maximum consumption: 225 watt
Hot Water Production Performance
500L = 4400 litres (60min) 8200 litres (120min) 12000 litres (180min), Recovery = 6 min
1000L = 5100 litres (60min) 8900 litres (120min) 12700 litres (180min), Recovery = 11 min

Domestic Installation Guarantee:
5 years parts and labour plus 6 – 10 years parts only
Commercial Installation Guarantee:
5 years parts and labour